Brick machine operation need to pay attention to what?

　　To introduce the below:

　　First, material will been used as soon as coming, should not be stored for too long.

　　Second, feeding, must pay attention to there are not big particle size of aggregate or other foreign material go into stir bucket, , especially iron and other solid objects.

　　Third, check whether brick plate is clean, found bonding block, must been shoveled,then go into the machine.

　　Fourth, we will strictly control vibration pressure time ,can be adjusted when necessary, pay attention to if the process is normal at any time, if the screw loose, should be stop to adjust timely t .

　　Fifth, the hydraulic system should be transferred to the rated pressure, washing oil screen on schedule, filtering oil at least once a year, often to check the actual gas oil, make up when necessary.

　　Sixth, If sliding sleeve and stand column are excessive worn, It needs to replace alloy, ensure that all edges clearance of die box and pressure head is roughly said, stripping smoothly.

　　Seventh, for the hopper bottom to keep consistent with mould plane, using a certain time it should be adjusted to check, sliding sleeve and stand column should be changed timely.

　　Eighth, commissioning for the first time, will have to manually filter through the plate. Plate length, thickness, tolerance accepted in a plus or minus 2 mm meters .

　　Ninth, keeping empty on the plate when the machine is running, if there is residual on the plate , then must been cleared in time.

　　Tenth, brick  machine in work situations, it is forbidden to non-working personnel, items close to the device, otherwise it will cause casualties and damage to the machine.