Contact Us
Hunan Sanhoo machinery Co,.Ltd.
Address:
Sany’s matching industrial district,The 2nd industrial district,Economy &Technology development zone,Loudi,Hunan,China
Tel: 0086-738-8222908
International Trade Dept.
Contact Person:
Adam Liu (Manager)
Mobile/Wechat/WhatsApp:
0086-13027386222
Email: adam@sanhoomachinery.com
Dymanic of Amigos
Home > News > Dymanic of AmigosTips of brick machine maintenance
By 佚名 at 29 Dec 2013 15:39 Views：2132
Brick machine maintenance skills, It is not only to guarantee to achieve the best maintenance effect ,but also can save time and effort, We don’t need send people looking at machine every day. if you are interested, please look at the following introduction:
(1) every time when equipment will work, if you don't want to do early check, just need to boot device to idle for 2-5 minutes, no exception to continual production, which part of the problem is found, then stop to troubleshooting problems timely, Preventing failure in production.
(2) the newly installed equipment, after a week in equipment production, oil filtration must been done, and cleaning tank, and then on the basis of the machine work load, 3-6 months to replace oil, cleaning tank at a time.
(3) equipment in production, it is strictly prohibited for any failure to repair equipment directly, be sure to stop machine, if the system and equipment fever must also not to open the cap, be sure to stop and check processing.
(4) the equipment in production, must adjust control unit, and each connecting parts must been inspected, It is best can be professional production after commissioning.
(5) all of brick machine are made of metal parts, so be sure to pay attention to the preservation, avoid open-air, should be waterproof, sunscreen, and anti-freezing measures, in order to ensure the safe of equipment.
Above the effect of introduced several methods is very obvious, but if we have time to have the ability, preferably on a regular basis to professional maintenance of equipment, because the usual maintenance can only support equipment will not happen big fault, our company is specialized is engaged in the brick machine, baking-free brick machine, hollow block machine, cement block machine, hydraulic brick machine, brick block machine and other equipment production and research and development. Welcome l customers come to visit our factory.
(1) every time when equipment will work, if you don't want to do early check, just need to boot device to idle for 2-5 minutes, no exception to continual production, which part of the problem is found, then stop to troubleshooting problems timely, Preventing failure in production.
(2) the newly installed equipment, after a week in equipment production, oil filtration must been done, and cleaning tank, and then on the basis of the machine work load, 3-6 months to replace oil, cleaning tank at a time.
(3) equipment in production, it is strictly prohibited for any failure to repair equipment directly, be sure to stop machine, if the system and equipment fever must also not to open the cap, be sure to stop and check processing.
(4) the equipment in production, must adjust control unit, and each connecting parts must been inspected, It is best can be professional production after commissioning.
(5) all of brick machine are made of metal parts, so be sure to pay attention to the preservation, avoid open-air, should be waterproof, sunscreen, and anti-freezing measures, in order to ensure the safe of equipment.
Above the effect of introduced several methods is very obvious, but if we have time to have the ability, preferably on a regular basis to professional maintenance of equipment, because the usual maintenance can only support equipment will not happen big fault, our company is specialized is engaged in the brick machine, baking-free brick machine, hollow block machine, cement block machine, hydraulic brick machine, brick block machine and other equipment production and research and development. Welcome l customers come to visit our factory.